We have recently worked on modifying the OCaml system to be able to pack a set of modules within a functor, parameterized on some signatures. This page presents this work, funded by Jane Street.

All the patches on this page are provided for OCaml version 3.12.1.

Packing Functors

Installation of the modified OCaml system

The patch for OCaml 3.12.1 is available here:

ocaml+libfunctor-3.12.1.patch.gz (26 kB)

To use it, you can use the following recipe, that will compile and install the patched version in ~/ocaml+libfunctor-3.12.1/bin/.

[code language=”bash” gutter=”false”]
~% wget http://caml.inria.fr/pub/distrib/ocaml-3.12/ocaml-3.12.1.tar.gz
~% tar zxf ~/ocaml-3.12.1.tar.gz
~% cd ocaml-3.12.1
~/ocaml-3.12.1% wget www.ocamlpro.com/code/ocaml+libfunctor-3.12.1.patch.gz
~/ocaml-3.12.1% gzip -d ocaml+libfunctor-3.12.1.patch.gz
~/ocaml-3.12.1% patch -p1 < ocaml+libfunctor-3.12.1.patch
~/ocaml-3.12.1% ./configure –prefix ~/ocaml+libfunctor-3.12.1
~/ocaml-3.12.1% make coldstart
~/ocaml-3.12.1% make ocamlc ocamllex ocamltools
~/ocaml-3.12.1% make library-cross
~/ocaml-3.12.1% make bootstrap
~/ocaml-3.12.1% make all opt opt.opt
~/ocaml-3.12.1% make install
~/ocaml-3.12.1% cd ~
~% export PATH=$HOME/ocaml+libfunctor-3.12.1/bin:$PATH
[/code]

Note that it needs to bootstrap the compiler, as the format of object files is not compatible with the one of ocaml-3.12.1.

Usage of the lib-functor patch.

Now that you are equiped with the new system, you can start using it. The lib-functor patch adds two new options to the compilers ocamlc and ocamlopt:

  • -functor <interface_file> : this option is used to specify that the current module is compiled with the interface files specifying the argument of the functor. This option should be used together with -for-pack <module>, where <module> is the name of the module in which the current module will be embedded.
  • -pack-functor <module> : this option is used to pack the modules. It should be used with the option -o <object_file> to specify in which module it should be embedded. The <module> specified with -pack-functor specifies the name of functor that will be created in the target object file.

If the interface x.mli contains :

[code language=”fsharp”]
type t
val compare : t -> t -> int
[/code]

and the files xset.ml and xmap.ml contain respectively :

[code language=”fsharp” title=”(* xset.ml *)”]
module T = Set.Make(X)
[/code]

[code language=”fsharp” title=”(* xmap.ml *)”]
module T = Map.Make(X) module T = Set.Make(X)
[/code]

Then :

[code language=”bash” gutter=”false”]
~/test% ocamlopt -c -for-pack Xx -functor x.cmi xset.ml
~/test% ocamlopt -c -for-pack Xx -functor x.cmi xmap.ml
~/test% ocamlopt -pack-functor MakeSetAndMap -o xx.cmx xset.cmx xmap.cmx
[/code]

will construct a compiled unit whose signature is (that you can get with ocamlopt -i xx.cmi, see below) :

[code language=”fsharp”]
module MakeSetAndMap :
functor (X : sig type t val compare : t -> t -> int end) ->
sig
module Xset :
sig
module T :
sig
type elt = X.t
type t = Set.Make(X).t
val empty : t
val is_empty : t -> bool

end
end
module Xmap :
sig
module T :
sig
type key = X.t
type ‘a t = ‘a Map.Make(X).t
val empty : ‘a t
val is_empty : ‘a t -> bool

end
end
end
[/code]

Other extension: printing interfaces

OCaml only allows you to print the interface of a module or interface by compiling its source with the -i option. However, you don’t always have the source of an object interface (in particular, if it was generated by packing), and you might still want to do it.

In such a case, the lib-functor patch allows you to do that, by using the -i option on an interface object file:

[code language=”bash” gutter=”false”]
~/test% cat > a.mli
val x : int
~/test% ocamlc -c -i a.mli
val x : int
~/test% ocamlc -c -i a.cmi
val x : int
[/code]

Other extension: packing interfaces

OCaml only allows you to pack object files inside another object file (.cmo or .cmx). When doing so, you can either provide an source interface (.mli) that you need to compile to provide the corresponding object interface (.cmi), or the object interface will be automatically generated by exporting all the sub-modules within the packed module.

However, sometimes, you would want to be able to specify the interfaces of each module separately, so that:

  • you can reuse most of the interfaces you already specified
  • you can use a different interface for a module, that the one used to compile the other modules. This happens when you want to export more values to the other internal sub-modules than you want to export to the user.

In such a case, the lib-functor patch allows you to do that, by using the -pack option on interface object files:

[code language=”bash” gutter=”false”]
test% cat > a.mli
val x : int
test% cat > b.mli
val y : string
test% ocamlc -c a.mli b.mli
test% ocamlc -pack -o c.cmi a.cmi b.cmi
test% ocamlc -i c.cmi
module A : sig val x : int end
module B : sig val y : string end
[/code]

Using ocp-pack to pack source files

Installation of ocp-pack

Download the source file from:

Then, you just need to compile it with:

[code language=”bash” gutter=”false”]
~% tar zxf ocp-pack-1.0.1.tar.gz
~% cd ocp-pack-1.0.1
~/ocp-pack-1.0.1% make
~/ocp-pack-1.0.1% make install
[/code]

Usage of ocp-pack

ocp-pack can be used to pack source files of modules within just one source file. It allows you to avoid the use of the -pack option, that is not always supported by all ocaml tools (for example, ocamldoc). Moreover, ocp-pack tries to provide the correct locations to the compiler, so errors are not reported within the generated source file, but within the original source files.

It supports the following options:

[code language=”bash” gutter=”false”]
% ocp-pack -help
Usage:

ocp-pack -o target.ml [options] files.ml*

Options:
-o <filename.ml> generate filename filename.ml
-rec use recursive modules
all .ml files must have a corresponding .mli file
-pack-functor <modname> create functor with name <modname>
-functor <filename.mli> use filename as an argument for functor
-mli output the .mli file too
.ml files without .mli file will not export any value
-no-ml do not output the .ml file
-with-ns use directory structure to create a hierarchy of modules
-v increment verbosity
–version display version information
[/code]

ocp-pack automatically detects interface sources and implementation sources. When only the interface source is available, it is assumed that it is a type-only module, i.e. no val items are present inside.

Here is an example of using ocp-pack to build the ocamlgraph package:

[code language=”bash” gutter=”false”]
test% ocp-pack -o graph.ml \
lib/bitv.ml lib/heap.ml lib/unionfind.ml \
src/sig.mli src/dot_ast.mli src/sig_pack.mli \
src/version.ml src/util.ml src/blocks.ml \
src/persistent.ml src/imperative.ml src/delaunay.ml \
src/builder.ml src/classic.ml src/rand.ml src/oper.ml \
src/path.ml src/traverse.ml src/coloring.ml src/topological.ml \
src/components.ml src/kruskal.ml src/flow.ml src/graphviz.ml \
src/gml.ml src/dot_parser.ml src/dot_lexer.ml src/dot.ml \
src/pack.ml src/gmap.ml src/minsep.ml src/cliquetree.ml \
src/mcs_m.ml src/md.ml src/strat.ml
test% ocamlc -c graph.ml
test% ocamlopt -c graph.ml
[/code]

The -with-ns option can be used to automatically build a hierarchy of modules. With that option, sub-directories are seen as sub-modules. For example, packing a/x.ml, a/y.ml and b/z.ml will give a result like:

[code language=”fsharp”]
module A = struct
module X = struct … end
module Y = struct … end
end
module B = struct
module Z = struct … end
end
[/code]

Packing modules as functors

The -pack-functor and -functor options provide the same behavior as the same options with the lib-functor patch. The only difference is that -functor takes the interface source as argument, not the interface object.

Packing recursive modules

When trying to pack modules with ocp-pack, you might discover that your toplevel modules have recursive dependencies. This is usually achieved by types declared abstract in the interfaces, but depending on each other in the implementations. Such modules cannot simply packed by ocp-pack.

To handle them, ocp-pack provides a -rec option. With that option, modules are put within a module rec construct, and are all required to be accompagnied by an interface source file.

Moreover, in many cases, OCaml is not able to compile such recursive modules:

  • For typing reasons: recursive modules are typed in an environment containing only an approximation of other recursive modules signatures
  • For code generation reasons: recursive modules can be reordered depending on their shape, and this reordering can generate an order that is actually not safe, leading to an exception at runtime

To solve these two issues in most cases, you can use the following patch (you can apply it using the same recipe as for lib-functor, and even apply both patches on the same sources):

With this patch, recursive modules are typed in an environment that is enriched progressively with the final types of the modules as soon as they become available. Also, during code generation, a topological order is computed on the recursive modules, and the subset of modules that can be initialized using in that topological order are immediatly generated, leaving only the other modules to be reordered.